Through a few simple steps, we can guide you through your selection process and make sure you find the product that best suits your needs.
A-Frame Trailers
Stop here. This coupler is typically welded to the trailer tongue. Click here for Mul-T-Lock, the next best coupler protection.
Trailer Couplers with Surge Brakes
Stop here. The Trailer GatorTM is not designed for this complex trailer coupler.Click here for Mul-T-Lock, the next best coupler protection.
Important note: A very small number of trailers couplers are installed with extra long bolts attaching coupler to trailer tongue. Since Trailer GatorTM must fully close around coupler, it may be necessary for you to install the proper size coupler bolts. We suggest that you install bolts that protrude just enough to fasten the nut. This is the bolt and nut that attaches coupler to trailer tongue.
Color: Industrial Powder-Coat Red with Yellow Weather Matte decal
This trailer coupler locking device is designed to protect smaller trailers.
Fits couplers up to 4-1/8" (inches) wide and up to 9-6/8" (inches) long
Cost: $125.00
Weight: 7.85 pounds
Color: Industrial Powder-Coat Red with Yellow Weather Matte decal
Fits couplers up to 4-1/8" (inches) wide and up to 11-7/8" (inches) long
Cost: $140.00
Weight: 11.52 pounds
Color: Industrial Powder-Coat Red with Yellow Weather Matte decal
This trailer coupler locking device is designed to protect larger trailers.
Fits couplers up to 4-5/8" (inches) wide and 11-3/8" (inches) long
We recommend measuring the trailer coupler length and width and providing us with these measurements when placing your order. Please check the Comments box and provide us with the measurements under Comments.
